New

Secondo Fast

Fast-drying finishing oil for wooden floors and furniture.

Secondo Fast is a fast-drying finishing oil designed for wooden floors and furniture. Secondo Fast seals, waterproofs, provides resistance to abrasion and offers a satin finish.

Benefits

Satin finish;
Quick drying;
Low odor;
Easy to apply;
Great coverage;
Preserves the natural look of wood;
Protects against moisture;
Allows wood to breathe;
Wear and scratch resistant;
Waterproofs wood surfaces;
Protects against water, alcohol, and stains;
Long-lasting protection;
Does not raise the wood grain;
Does not create a film on the wood surface;
Easy refresh and restoration without sanding;
Easy spot repairs;
Easy care;
Available in 2 colours.

Fast application and drying

Waterproofs wood surfaces

Refreshing without stripping

Abrasion resistant

Usage

Interior : Ideal for floors, stairs, furniture, kitchen cabinets, vanities, windows, and doors.

Colours*

Rich and full-bodied, our colours are carefully prepared to bring out the natural grain of the wood. Durable, our oils let the wood breathe while providing the desired effect.

00 Colourless

22 Natural

The colour 00 – Colourless provides an amber finish. It is used to cover Uno coloured oils as well as Uno Colourless.

The colour 22 – Natural is slightly whitened and is used to cover Uno 19 – White and 22 – Natural colours to prevent yellowing. It helps preserve the whiteness of light woods (pine, maple, cherry, spruce, beech, aspen, etc.). It’s strongly recommended to perform a test beforehand on open-grain and coloured woods (oak, walnut, mahogany, elm, etc.).

For a smoother and softer finish, lightly sand between the last two coats with a 600 or 800 grit sandpaper.

^*Colours are for guidance only. Actual colours may vary from screen to screen. Not all colours are available in all formats.

Use

Preparation

Apply at a temperature above 15 °C.
Ensure the wood is clean, dry, and pre-treated with UNO tinting oil.

Application

Manual Application :

Thoroughly mix with a stick before and during application.
Apply in a thin coat, using circular motions, until the wood is saturated using a STAIN PAD, POLYCOTTON RAGS, short-haired roller, or brush.
After 5 to 15 minutes, wipe the surface dry with clean POLYCOTTON RAGS to remove any excess oil.
Clean tools and accessories used with TOOLS CLEANER AND THINNER, and soak oil-saturated cloths in water before disposing of them in the trash.
Allow 4 to 6 hours to dry.
Before applying a second coat, if more than 72 hours have passed since the first application, sand using 120 grit sandpaper and dust off before repeating all previous steps.
For furniture application, it is recommended to sand with 000000 steel wool or 800 grit sandpaper between coats to smooth the finish.

Mechanical Application :

Thoroughly mix with a stick before and during application.
Apply the oil using a trowel or short-haired roller.
After 5 to 15 minutes, polish using a floor polisher with a white or beige pad.
If there is excess oil after polishing, place a POLYCOTTON RAG under the pad and run the polisher again to remove excess oil. Replace the cloth when saturated with oil.
Alternatively, apply the oil directly with the polisher by adding a small amount of oil to the center of the pad and rubbing until the product is evenly applied.
Clean tools and accessories used with TOOLS CLEANER AND THINNER, and soak oil-saturated cloths in water before disposing of them in the trash.
Allow 4 to 6 hours to dry.
Before applying a second coat, if more than 72 hours have passed since the first application, sand using 120 grit sandpaper and dust off before repeating all previous steps.

Drying Time

Between coats : 4 to 6 hours
Careful traffic : 12 to 18 hours
Replace rugs and furniture : 7 days
First cleaning : after 10 days

Number of Coats

2 coats

Tools Cleaning

Prato-Verde Tools Cleaner and Thinner

Dilution

Maintenance

For regular cleaning : SECONDO CLEAN

To revive shine and enhance protection every 2 to 3 months : SECONDO MAINTENANCE

For intensive cleaning (degreasing, deep cleaning), as needed : SECONDO PREP

Further treatment

The greatest advantage of oil in wood treatment lies in its ease of maintenance and repair. The key to well-maintained oiled wood is prevention. The longer the intervall between treatments, the longer the process will take. When SECONDO CLEAN and SECONDO MAINTENANCE products are no longer sufficient to keep your oiled wood in good condition, it’s a sign that it’s time to consider applying a new layer of oil.

Good general condition (Less water resistance, visible footprints) :

Clean the wood with SECONDO CLEAN.
Apply a coat of SECONDO FAST according to the product instructions.
No sanding or stripping required.

Good general condition (Stains or small damaged areas) :

Sand the damaged area with 120-grit sandpaper.
Reapply UNO colouring oil to the sanded area following the product instructions.
Apply two coats of SECONDO FAST oil according to the product instructions.

Medium general condition (Slight discolouration, multiple stains, reduced water resistance, visible footprints) :

Clean the wood with SECONDO PREP.
Apply two coats of SECONDO FAST according to the product instructions.
No sanding or stripping required.

Poor general condition (Severe discolouration, graying surface, no water resistance, many stains or damaged areas) :

If cleaning with SECONDO PREP does not remove the stains and graying, restart the entire process with UNO and SECONDO FAST products.

Storage and Shelf Life

Keep the product in a sealed container at a temperature between 10°C and 25°C for storage. Under these conditions, the product will maintain its quality for at least 5 years.

If the product has been exposed to cold temperatures, allow it to return to room temperature for 24 hours before using.

Disposal of accessories and residues

After use, soak the rags in water or lay them flat to dry before disposal.

Wipe off any liquid residue before recycling the container.

Any leftover product should be brought to your municipality’s eco-center.

Warnings

Keep out of reach of children. Keep away from flames or sparks.

DANGER OF COMBUSTION : Materials such as rags used with this product may begin to burn by themselves. After use, put rags in water or lay flat to dry, then discard.

Documents

Technical data

Data sheet

Features

Surface types

Wood

Compatibility

Can be covered with : Secondo, Secondo Mono, Secondo Cera, Tavolo.

Always perform a preliminary test to ensure product suitability and compatibility.

Can be applied over : Oils, stains, waxes, and chalk paints.

Can be covered with : Oils, varnishes, waxes, hybrid finishes, lacquers, and paints.

Durability

High traffic surfaces : 2 to 3 years
Low traffic surfaces : 5 to 7 years

Coverage

Softwoods : 270 to 350 ft²/L
Hardwoods : 350 to 430 ft²/L

Composition

Blend of vegetable oils, vegetable wax, iron oxides, isoparaffin, lead-free and cobalt-free drier.

VOC

430 g/L

Sheen

Satin 30 %

Available Sizes

237 ml
946 ml
3,78 L

Viscosity

33 sec. +/- 2 sec.
with #4 Ford Cup
(Clear)

Origin

Canada

Guarantee

Guarantee : Prato-Verde guarantees the quality of its products. They conform to the description provided in the technical data sheets and on the labels suitable for the intended use, in accordance with the instructions written by the company. However, since the manufacturer has no control over the circumstances, methods, and conditions of use, this guarantee only covers the high quality of Prato-Verde products.

Take a look at our Frequently Asked Questions and find answers to the most frequently asked questions.

Find a retailer

Number Of Shops: 0 PRINT

These products may be of interest to you

New

Stain Pads

Cotton covered foam pads for stains, oils and liquid waxes application on wood surfaces

Polycotton Rags

Recycled white polycotton cloths

Secondo Maintenance

Protector for oiled wood

Uno

Colouring oil for wooden floors and furniture

Tools Cleaner and Thinner

Odorless

Secondo Clean

Soap for oiled wood

Ratings and comments

There are no reviews yet. Be the first one to write one.

New