Mobile template

Brio Zero

Hybrid, solvent-free monocoat finish for wooden walls and ceilings
Brio Zero is an emulsion of water and oils designed for wooden walls, ceilings, structures and frames. In one single application, Brio Zero colours, seals and waterproofs wood without hiding its natural details.

Benefits

  • Zero solvents;
  • Less than 8 g/L of VOC;
  • Low odor;
  • colours and seals wood in a single application;
  • Easy to apply;
  • Great coverage;
  • Reveals the wood grain;
  • Prevents wood discolouration;
  • Protects against moisture;
  • Penetrates and protects deeply;
  • Waterproofs wood surfaces;
  • Dries quickly;
  • Does not create a film on the wood surface;
  • Long-lasting protection;
  • Easy care;
  • Available in 18 colours.

 

Protects wood against moisture

Prevents wood discolouration

Washable and durable

Fast application and drying

Usage

Interior: Ideal for walls, ceilings, woodwork, beams, doors, paneling, moldings, structures, accessories, and decorative furniture.

Colours*

Rich and full-bodied, our colours are carefully prepared to bring out the natural grain of the wood. Durable, our oils let the wood breathe while providing the desired effect.

Colours can be mixed to create unique shades.

For a slightly deeper colour, apply a second coat after 6 to 18 hours.

For a lighter colour, mix with Brio Zero Colourless.

The colour 100 – Colourless provides a wet finish and highlights the wood grain.

The colour 101 – Natural has a slightly whitened appearance. It helps maintain the whiteness of white woods (pine, maple, cherry, spruce, beech, aspen, etc.). It is strongly recommended to perform a test beforehand on open-grain and coloured woods (oak, walnut, mahogany, elm, etc.).

*Colours are for guidance only. Actual colours may vary from screen to screen. Not all colours are available in all formats.

Use

  1. Apply at a temperature above 10 °C.
  2. The wood must be free from any previous finish and meticulously sanded with 150 grit sandpaper.
  3. Dust off using a vacuum cleaner.
  4. After sanding, it is recommended to clean the wood with PRATO PREP to remove dust particles, reduce tannins, and enhance colour intensity.
  5. Perform a test of the product on a hidden surface and let it dry for 24 hours to validate the result, as it may vary depending on the type of wood used.
  1. Thoroughly mix with a stick before and during application.
  2. Apply generously until the wood is saturated using a STAIN PAD, roller, or staining brush.
  3. After 5 minutes, if needed, even out the surface with a brush to remove any excess product.
  4. Clean tools and accessories used with soapy water.
  5. Allow 6 to 18 hours to dry.
  6. Optional: For the application of a second coat, if more than 24 hours have passed since the first application, sand using 150 grit sandpaper before repeating all previous steps.

Handle with care : 6 hours

Between coats : 6 to 18 hours

Full cure : 2 days

1 to 2 coats

For a deeper colour, apply a second coat after 6 to 18 hours.

Soapy water

For regular cleaning : SECONDO CLEAN

To revive shine and enhance protection every 2 to 3 months : SECONDO MAINTENANCE

For intensive cleaning (degreasing, deep cleaning), as needed : SECONDO PREP

The greatest advantage of oil in wood treatment is its ease of maintenance and repair. The key to well-maintained oiled wood is prevention. The longer the interval between treatments, the longer the process will take. Once SECONDO CLEAN and SECONDO MAINTENANCE are no longer sufficient to keep your oiled wood in good condition, it’s a sign that it’s time to consider applying a new coat of oil.

BRIO ZERO requires no further treatment for a long time, unless there are stains or damage to small localized areas.

For areas in generally good condition (with stains or small localized damage):

  1. Sand the damaged localized area with 120-grit sandpaper.
  2. Reapply BRIO ZERO finishing oil to the sanded area following the product’s instructions.

As needed, within 8 to 15 years:

  1. Clean the wood with SECONDO PREP.
  2. Apply a coat of BRIO ZERO following the product’s instructions.
  3. No sanding or stripping required.

Protect from freezing. Do not use this product if it has frozen.

Keep the product in a sealed container at a temperature between 10°C and 25°C for storage. Under these conditions, the product will maintain its quality for at least 5 years.

Wipe off any liquid residue before recycling this container.

Consult your municipality for proper disposal of any remaining product.

Keep out of reach of children.

Documents

Features

Wood, cork

Always perform a preliminary test to ensure product suitability and compatibility.

Can be applied over: Oils and stains.

Can be covered with: Oils, varnishes, and waxes.

8 to 15 years

100 to 200 ft²/L

Blend of modified vegetable oils, water, UV filters, iron oxides.

< 8 g/L

One coat : Matte 2 to 4 %.
Two coats : Matte 5 to 7 %.

20 ml (Sample)
946 ml
3,78 L
18,9 L

16 sec. +/- 2 sec.
with #4 Ford Cup
(Clear)

Canada

Guarantee : Prato-Verde guarantees the quality of its products. They conform to the description provided in the technical data sheets and on the labels suitable for the intended use, in accordance with the instructions written by the company. However, since the manufacturer has no control over the circumstances, methods, and conditions of use, this guarantee only covers the high quality of Prato-Verde products.

Take a look at our Frequently Asked Questions and find answers to the most frequently asked questions.

Find a retailer

Radius: Km
Loading...
Number Of Shops: 0 PRINT

    Store Direction

    GET DIRECTIONS

    Use my location to find the closest Service Provider near me

    Description

    Ratings and comments

    There are no reviews yet. Be the first one to write one.

    Write a review