Hemp Oil

Solvent-free and VOC-free first pressed hemp oil

Hemp Oil is a natural, pure and first pressed oil designed for finishing all interior wooden projects, including food surfaces. Hemp Oil protects against water and offers a matte finish.

Benefits

Zero solvents;
Low environmental impact;
Matte to satin finish;
Easy to apply;
Great coverage;
Preserves the natural look of wood;
Penetrates and protects wood deeply;
Allows wood to breathe;
Protects against water, alcohol, and stains;
Good resistance to liquids such as tea, wine, juice;
Does not raise the wood grain;
Does not create a film on the wood surface;
Easy refresh and restoration;
Easy care;
Easy spot repairs;
Ideal for food-contact surfaces.

Preserves the natural look of wood

Washable and durable

Protects against water, alcohol and stains

Abrasion resistant

Usage

Interior : Ideal for food surfaces such as countertops, tables, butcher blocks, as well as furniture, accessories, and other indoor wood projects.

Tips

For a smoother and more even finish, lightly sand between coats with 600 or 800 grit sandpaper.

Use

Preparation

Apply at a temperature above 15 °C.
Ensure the wood is free from any previous finish and meticulously sanded with 100 or 120 grit sandpaper.
Dust off using a vacuum cleaner.
It is recommended to clean the wood with PRATO PREP to remove dust particles, reduce tannins, and enhance colour intensity.

Application

Thoroughly mix with a stirring stick.
Apply a generous coat of oil until the wood is saturated using a staining pad, a cotton cloth, or a staining applicator.
After 30 to 60 minutes, remove any excess oil by rubbing the surface with a cotton cloth.
Allow 24 to 48 hours for drying.
Repeat all previous steps for subsequent coats.

Drying Time

Between coats : 24 to 48 hours

Use : 2 days

First wet cleaning : 21 days

Number of Coats

3 to 6 coats

Tools Cleaning

Prato-Verde Tools Cleaner and Thinner

Dilution

For faster drying, mix 1 L of Hemp Oil with 300 ml of Citrus Solvent.

Maintenance

For regular cleaning : SECONDO CLEAN

To revive shine and enhance protection every 2 to 3 months : SECONDO MAINTENANCE

For intensive cleaning (degreasing, deep cleaning), as needed only : SECONDO PREP

Further treatment

The greatest advantage of oil in wood treatment lies in its ease of maintenance and repair. The key to well-maintained oiled wood is prevention. The longer the interval between treatments, the longer the process will take. When SECONDO CLEAN and SECONDO MAINTENANCE products are no longer sufficient to keep your oiled wood in good condition, it’s a sign that it’s time to consider applying a new layer of oil.

Good general condition (Reduced liquid resistance) :

Clean the wood with SECONDO CLEAN.
Apply a coat of HEMP OIL according to the product instructions.
No sanding or stripping required.

Good general condition (Stains or small damaged areas) :

Sand the damaged area with 120-grit sandpaper.
Apply three to six coats of HEMP OIL to the sanded area following the product instructions.

Medium general condition (Slight discolouration, multiple stains, reduced liquid resistance) :

Clean the wood with SECONDO PREP.
Apply several coats of HEMP OIL according to the product instructions.
No sanding or stripping required.

Poor general condition (Severe discolouration, graying surface, no liquid resistance, many stains or damaged areas) :

If cleaning with SECONDO PREP does not remove the stains and graying, repeat the initial procedure for HEMP OIL.

Storage and Shelf Life

Keep the product in a sealed container at a temperature between 10°C and 25°C for storage. Under these conditions, the product will maintain its quality for at least 5 years.

If the product has been exposed to cold temperatures, allow it to return to room temperature for 24 hours before using.

Disposal of accessories and residues

After use, soak the rags in water or lay them flat to dry before disposal.

Wipe off any liquid residue before recycling the container.

Any leftover product should be brought to your municipality’s eco-center.

Warnings

Keep out of reach of children.

Documents

Technical data

Data sheet

Features

Surface types

Wood, cork

Compatibility

Can be covered with : Secondo, Secondo Mono, Secondo Cera, Secondo Fast, Tavolo.

Always perform a preliminary test to ensure product suitability and compatibility.

Can be applied over : Oils, stains, waxes, and chalk paints.

Can be covered with : Oils, varnishes, waxes, hybrid finishes, lacquers, and paints.

Durability

Food contact surfaces : 3 to 12 months
Structures, walls, ceilings, and woodwork : 1 to 3 years
Furniture : 1 to 5 years
Floors : 1 year

Coverage

120 to 230 ft²/L

Composition

First pressed Hemp oil

VOC

0 g/L

Sheen

Matte

Available Sizes

946ml

Viscosity

28 sec. +/- 2 sec.
with #4 Ford Cup
(Clear)

Origin

Canada

Guarantee

Guarantee : Prato-Verde guarantees the quality of its products. They conform to the description provided in the technical data sheets and on the labels suitable for the intended use, in accordance with the instructions written by the company. However, since the manufacturer has no control over the circumstances, methods, and conditions of use, this guarantee only covers the high quality of Prato-Verde products.

Take a look at our Frequently Asked Questions and find answers to the most frequently asked questions.

Find a retailer

Number Of Shops: 0 PRINT

These products may be of interest to you

Tools Cleaner and Thinner

Odorless

Citrus Solvent

Vegetable-based solvent extracted from citrus peel

Black Soap

Solvent-free and biodegradable olive oil-based soap for oiled and varnished wood

New

Stain Pads

Cotton covered foam pads for stains, oils and liquid waxes application on wood surfaces

Interior Products

Wood Finishing Oils

Preparation & Care

Exterior Products

Wood Finishing Oils

Preparation & Care

General Use Products

Tools & Accessories

Preparation

Restoration

Protective Oils

Finishing Oils

Care & Maintenance

Walls & Ceilings

Wooden Floors & Furniture

Food Contact Surfaces

Terraces & other exterior projects