Pareo Zero

Solvent-free and fast drying hybrid finish for wooden decks and sidings for easy restoration without sanding

Pareo Zero is an emulsion of oils and water designed for decks, sidings, fences, and other outdoor wood projects. Pareo Zero colours, seals, waterproofs, and prevents discolouration. It doesn’t peel or blister and is easy to restore without sanding or stripping.

Benefits

Zero solvents;
Less than 8 g/L of VOC;
Low odor;
Great coverage;
Dries quickly;
Reveals the wood grain;
Preserves the natural look of wood;
Penetrates and protects wood deeply;
Protects against moisture, mold, and pests;
Allows wood to breathe;
Waterproofs wood surfaces;
Does not create a film on the wood surface;
Does not blister, peel, or whiten;
Designed to withstand harsh Canadian climate;
Prevents wood discolouration due to UV rays;
Prevents wood from graying while preserving its natural colour;
Easy refresh and restoration without stripping or sanding.

Prevents wood discolouration

Waterproofs wood surfaces

Refreshing without stripping

Designed to withstand harsh Canadian climate

Usage

Exterior : Ideal for decks, siding, docks, fences, structures, garden furniture, doors, windows, playground equipment, flower boxes, and other outdoor wood projects.

Colours*

Rich and full-bodied, our colours are carefully prepared to bring out the natural grain of the wood. Durable, our oils let the wood breathe while providing the desired effect.

Colours can be mixed to create unique shades.

For application on sawn wood, you can reduce the colour intensity by adding Pareo Zero 100 – Colourless in a maximum ratio of 1:1. This step is not recommended for planed and sanded woods, as diluting the colour pigments would decrease UV resistance.

Applying colours 100 – Colourless and 101 – Natural on surfaces exposed to sunlight requires more frequent maintenance.

Colour 100 – Colourless provides an amber finish and highlights the wood grain.

Colour 101 – Natural is slightly whitened and helps preserve the whiteness of light woods (pine, maple, cherry, spruce, beech, aspen, etc.). It is strongly recommended to perform a test beforehand on open-grain and coloured woods (oak, walnut, mahogany, elm, etc.).

^*Colours are for guidance only. Actual colours may vary from screen to screen.

Use

Preparation

Ensure the wood’s moisture content is below 20%.
Do not apply in direct sunlight or at temperatures below 10 °C, or in very humid conditions.
For untreated wood or regular maintenance, clean the wood with PAREO PREP. For stripping stained or oiled wood, clean with PAREO RESET.
The wood must be clean, completely dry, and sanded with 60 or 80 grit sandpaper; change the sandpaper regularly to ensure good product penetration.
Dust off using a vacuum cleaner.
Perform a product test on a hidden surface and allow 6 hours between coats to validate the result, as it may vary depending on the type of wood used.

Application

Thoroughly mix with a stick before and during application.
Apply the first coat generously until the wood is saturated using a staining brush or a staining pad.
After 5 minutes, if necessary, wipe the surface with a brush to remove any excess oil.
Clean tools and accessories used with soapy water.
Allow drying for 6 to 18 hours.
If more than 24 hours have passed since the first application, lightly sand with 120-grit sandpaper before the second application.
Apply a second thin coat, repeating all previous steps.

Drying Time

Water resistance : 3 hours

Between coats : 6 to 18 hours, depending on temperature and humidity

Careful traffic : 12 hours

Full cure : 2 days

Number of Coats

2 coats

Tools Cleaning

Soapy water

Dilution

Maintenance

For regular cleaning : PAREO CLEAN

To revive shine and enhance protection every 2 to 3 months : PAREO MAINTENANCE

For intensive cleaning (degreasing, deep cleaning), as needed : PAREO PREP

For complete stripping : PAREO RESET

Further treatment

The greatest advantage of oil in wood treatment lies in its ease of maintenance and repair. The key to well-maintained oiled wood is prevention. The longer the interval between treatments, the longer the process will take. When PAREO CLEAN and PAREO MAINTENANCE products are no longer sufficient to keep your oiled wood in good condition, it’s a sign that it’s time to consider applying a new layer of oil.

Good general condition (Wood slightly dull) :

Clean the wood with PAREO CLEAN.
Apply a coat of PAREO ZERO according to the product instructions.
No sanding or stripping required.

Good general condition (Stains or small damaged areas) :

Sand the damaged area with 60 or 80-grit sandpaper.
Apply two coats of PAREO ZERO finishing oil to the sanded area following the product instructions.

Medium general condition (Slight discolouration, multiple stains, reduced resistance against water) :

Clean the wood with PAREO PREP.
Apply one to two coats of PAREO ZERO according to the product instructions.
No sanding or stripping required.

Poor general condition (Severe discolouration, graying surface, no water resistance, many stains or damaged areas) :

Clean the wood with PAREO RESET.
Sand the wood with 60 or 80-grit sandpaper.
Apply two coats of PAREO ZERO according to the product instructions.

Storage and Shelf Life

Protect from freezing. Do not use this product if it has frozen

Store in an airtight container at a temperature between 10°C and 25°C. The product has a shelf life of 2 years under these conditions.

Disposal of accessories and residues

Wipe off any liquid residue before recycling this container.

Consult your municipality for proper disposal of any remaining product.

Warnings

Keep out of reach of children.

Documents

Technical data

Data sheet

Features

Surface types

Untreated wood
Commercially treated dry wood (1 year)
Restored wood (stained or oiled)
Exotic wood

Compatibility

Always perform a preliminary test to ensure product suitability and compatibility.

Can be applied over : Oils and certain transparent and semi-transparent exterior oil-based stains.

Can be covered with : Varnishes and paints.

Durability

Vertical surfaces : 2 to 6 years
Horizontal surfaces : 1 to 3 years

Coverage

Average Coverage

Sanded Wood : 275 to 375 ft²/gal
Rough-Cut Wood : 150 to 250 ft²/gal

Composition

Blend of modified vegetable oils, water, UV filters, iron oxides

VOC

< 8 g/L

Sheen

Matte 5 to 7 %

Available Sizes

20 ml (Sample)
946 ml
3,78 L
18,9 L

Viscosity

16 sec. +/- 2 sec.
with #4 Ford Cup
(Clear)

Origin

Canada

Guarantee

Guarantee : Prato-Verde guarantees the quality of its products. They conform to the description provided in the technical data sheets and on the labels suitable for the intended use, in accordance with the instructions written by the company. However, since the manufacturer has no control over the circumstances, methods, and conditions of use, this guarantee only covers the high quality of Prato-Verde products.

Take a look at our Frequently Asked Questions and find answers to the most frequently asked questions.

Find a retailer

Number Of Shops: 0 PRINT

These products may be of interest to you

Pareo Prep

Solvent-free and VOC-free, cleaner and preparer for exterior wood, biodegradable and safe for vegetation

Stain Pads

Cotton covered foam pads for stains, oils and liquid waxes application on wood surfaces

Pareo Maintenance

Protector for oiled wood

Pareo Clean

Soap for oiled wood

Pareo Reset

Solvent-free and VOC-free wood stripper for oiled and stained wood, biodegradable and safe for vegetation

Ratings and comments

There are no reviews yet. Be the first one to write one.

Interior Products

Wood Finishing Oils

Preparation & Care

Exterior Products

Wood Finishing Oils

Preparation & Care

General Use Products

Tools & Accessories

Preparation

Restoration

Protective Oils

Finishing Oils

Care & Maintenance

Walls & Ceilings

Wooden Floors & Furniture

Food Contact Surfaces

Terraces & other exterior projects