Pareo Reset is a biodegradable and vegetation-safe stripper designed for the removal of exterior wood finishes before applying a Prato-Verde product. Pareo Reset works on stained and/or oiled woods, whether clear or semi-clear. It can be used on decks, sidings, fences, and other wooden projects.
Benefits
Concentrated formula;
Water-based;
Zero VOC;
Biodegradable;
Safe for vegetation;
Low environmental impact;
Low odor;
Easy to use;
Fast-acting;
Effectively removes oils and transparent or semi-transparent stains;
Restores the natural colour of wood;
Lifts stubborn stains;
Cleans deeply;
Prepares the surface before applying a wood finishing product;
Ideal for stripping exterior oiled woods.
Preserves the natural look of wood
Protects wood against moisture
Prevents wood discolouration
Washable and durable
Fast application and drying
Biodegradable
Low odor
High quality
Waterproofs wood surfaces
Protects against water, alcohol and stains
Refreshing without stripping
Abrasion resistant
Designed to withstand harsh Canadian climate
Impeccable results
Easy to use
Healthy products
Usage
Exterior : Ideal for stripping decks, siding, docks, fences, structures, garden furniture, doors, windows, playground equipment, flower boxes, and other outdoor wood projects.
Colours*
Rich and full-bodied, our colours are carefully prepared to bring out the natural grain of the wood. Durable, our oils let the wood breathe while providing the desired effect.
Protect surrounding vegetation by spraying it with water before and after treatment.
The product is ineffective on wet surfaces; ensure that the surface to be treated remains dry.
*Colours are for guidance only. Actual colours may vary from screen to screen.
Tips
Protect surrounding vegetation by spraying it with water before and after treatment.
The product is ineffective on wet surfaces; ensure that the surface to be treated remains dry.
Use
Preparation
Protect surrounding vegetation by watering it before and after treatment.
The product is ineffective on wet surfaces; ensure the surface to be treated remains dry.
Add 1 liter of PAREO RESET per liter of warm water and mix.
Always perform a test of the product on a small area before use.
Application
Apply the mixture onto the dry surface using a sprayer, floor brush, or paintbrush.
Let it sit for 10 to 15 minutes.
Reapply the solution if it dries during the waiting time; the surface should remain well saturated with the product.
Scrub the surface with a stripping brush and rinse thoroughly with plenty of water OR use a high-pressure water jet (1000 to 3000 psi) to remove the stain. Rinse until all foam is eliminated.
Allow the wood to dry completely before repeating the application if necessary or before applying a new finishing product.
Drying Time
12 to 48 hours, depending on temperature and humidity
Number of Coats
Tools Cleaning
Water
Dilution
1:1
Mix 1 L of Pareo Reset with 1 L of warm water.
Maintenance
Further treatment
Storage and Shelf Life
Protect from freezing. If the product has been exposed to cold temperatures, allow it to return to room temperature for 24-48 hours before using.
Store in an airtight container at a temperature between 10°C and 25°C. The product has a shelf life of 12 months under these conditions.
Disposal of accessories and residues
Wipe off any liquid residue before recycling this container.
Consult your municipality for proper disposal of any remaining product.
Warnings
CORROSIVE
CAUSES BURNS. DANGEROUS FUMES FORM WHEN MIXED WITH OTHER PRODUCTS.
Do not mix with other household chemicals. Do not swallow. Do not breathe fumes. Do not get in eyes. Do not get on skin or clothing. Keep out of reach of children. Use only in a well-ventilated area. Wear a mask, impervious gloves and safety glasses. Handle with care. Close after each use.Oiled or stained wood
Always perform a preliminary test. Certain wood species may darken when in contact with a stain remover. In such cases, it is recommended to bleach the wood with Pareo Prep after the stripping process.
Guarantee : Prato-Verde guarantees the quality of its products. They conform to the description provided in the technical data sheets and on the labels suitable for the intended use, in accordance with the instructions written by the company. However, since the manufacturer has no control over the circumstances, methods, and conditions of use, this guarantee only covers the high quality of Prato-Verde products.
Take a look at our Frequently Asked Questions and find answers to the most frequently asked questions.
Nous utilisons des cookies. Si vous pensez que cela vous convient, cliquez simplement sur « Accepter tout ». Vous pouvez également choisir le type de cookies que vous souhaitez en cliquant sur « Paramètres ».
Lire notre politique en matière de cookies