Stir well with a stick before and during application. Do not shake. Do not apply in the sun or at a temperature below 10 ° C. The wood should be clean and sanded with 120 grit paper before application, and the moisture content of the wood should be less than 20%.

Colorless Pareo Zero can be added to colored Pareo Zero to decrease the intensity of the color.

Apply with a brush, stain pad or roller. If more than 24 hours have passed since the first application, lightly sand with 120 grit before the second application.

The use of a gun is strongly discouraged for vertical application. For horizontal surfaces, wipe off excess oil after spraying.

In order to maintain the original color of the wood, it is possible to apply 2 coats of colorless or natural Pareo Zero.

• Water resistance: 3 hours
• Between coats: 6 to 18 hours depending on the moisture content of the wood
• Careful circulation: 12 hours
• Complete drying: 2 days

• Horizontal surfaces: 2 coats
• Vertical surfaces: 1 to 2 coats

On horizontal surfaces, always apply 2 coats of the same color to ensure even wear and easy restoration.

It is not recommended to use Pareo Zero in natural color on exotic, roasted or restored woods (stripped and sandblasted).

• Sanded wood: 100 to 200 ft. sq. / L
• Sawn timber (rough): 65 to 100 ft. sq. / L
• On roasted wood: 275 to 375 ft. sq. / L
• On exotic woods: 375 to 450 ft. sq. / L

Clean with water and brush. When the finish becomes dull and slightly discolored (after 1 to 6 years), clean, sand lightly to grit 80 and apply a coat of colorless Pareo Base to revive the color and make the wood waterproof.

Must not freeze. Store in an airtight container at room temperature.

Consult your municipality to properly dispose of the remains of this product.